Store

NanoGig Screen by your pedal, two ways: a license for a board you build yourself, or a kit that arrives ready to plug in. Payment and VAT are handled by our store provider.

Firmware license

For a board of your own: one of the supported touchscreens. Try first:install the firmware from the browser, and it runs for 15 minutes after each power-on. Buy a license when you're happy.

NanoGig Screen license

$14.99launch price, $29.99 later
  • One license for one screen, on any supported board (ESP32-2432S028, Guition JC4827W543, LCDwiki ES3C35P).
  • You get the key right after paying, and by email. Activate it on Activate, or while installing.
  • Updates for that screen, over Wi-Fi or from Install.
  • You can move it to another screen once yourself.
  • Try it before you buy: purchases are final, except for a refund if the firmware can’t be made to work on a supported board. Terms

Kits

A screen in a 3D-printed case, with NanoGig Screen installed and licensed before it ships. Plug it into USB power, close Cortex Cloud, and it finds your pedal. Kits are made by hand in small batches: send a request and we reply with a payment link. When a kit is out of stock, a request puts you on the list for the next one.

Kit prices are for the kit only. We quote shipping to your country in our reply, and you pay it with the kit. Import VAT and customs duties, if your country charges them, are collected on delivery.

The 3.5" kit showing preset 11B, Edge Simple 2, its USB-C cable at the left endThe 3.5" kit from slightly to the leftThe 3.5" kit from straight on, close upThe 3.5" kit from the side: a black printed case around the screenThe 3.5" kit from a low angle, its cable plugged in at the endThe 3.5" kit from aboveThe 3.5" kit turned round with the display rotated 180°, its cable at the right endThe back of the 3.5" kit: four screws and the NanoGig logoThe back of the 3.5" kit from another angle

NanoGig Screen 3.5 kit

3.5" · 480×320 · capacitive touch · ESP32-S3

A sharp 3.5" capacitive screen in a printed case: the one to pick.

  • LCDwiki ES3C35P screen
  • A two-part 3D-printed case in PETG
  • Firmware installed and licensed
  • USB cable

$89+ shippingIn stockShips in 2–5 days

Ships worldwide.

Request this kit
NanoGig Screen 4.3 kit: the Guition JC4827W543 in its printed case, showing the gig view (a render)

NanoGig Screen 4.3 kit

4.3" · 480×272 · capacitive touch · ESP32-S3

The widest picture: a 4.3" capacitive screen in a printed case, readable from further away.

  • Guition JC4827W543 screen
  • A two-part 3D-printed case in PETG
  • Firmware installed and licensed
  • USB cable

Price to be announcedOut of stock

Ships worldwide.

Request this kit
NanoGig Screen 2.8 kit: the ESP32-2432S028 in its printed case, showing the gig view (a render)

NanoGig Screen 2.8 kit

2.8" · 320×240 · resistive touch · ESP32

The compact kit: the 2.8" Cheap Yellow Display in a printed case that sits next to the pedal.

Not recommended: its resistive touch screen needs a firmer press than the capacitive 3.5" and 4.3" screens.

  • ESP32-2432S028 screen
  • A two-part 3D-printed case in PETG
  • Firmware installed and licensed
  • USB cable

$69+ shippingOut of stock

Ships worldwide.

Request this kit

Request a kit

We use these details only to answer your request, and delete them 90 days after you send it. See Privacy. No payment now: we reply with the shipping cost and a payment link, or, for a kit that is out of stock, when the next one is ready.