Skip to content

LCDwiki ES3C35P

NanoGig Screen's gig view at 480×320
NanoGig Screen on this board, 480×320.
Board ID es3c35p
Display 3.5”, 480×320, used in landscape
Touch Capacitive
Chip ESP32-S3 (16 MB flash, 8 MB PSRAM)
Status Tested on a pedal

A sharper, larger screen than the CYD, with capacitive touch that reacts to a light tap. NanoGig Screen uses the extra room for bigger type and more on each page.

Tested on the bench in October 2026: picture, colours, touch and the pedal connection all work.

Look for the model number ES3C35P from LCDwiki: the 3.5” ESP32-S3 version with capacitive touch, 16 MB flash and 8 MB PSRAM (N16R8).

5 V over its USB-C socket. A USB cable that carries data is also what the web installer needs.

The back of the ES3C35P: the USB-C socket on the right edge, with the BOOT button above it and RESET below

The socket is on the back, at the right edge. BOOT and RESET, the two buttons beside it, are the ones to use if the installer can’t reach the board (see Getting started).

It updates over Wi-Fi like the other boards: see Updating.

NanoGig is not affiliated with or endorsed by Neural DSP. Nano Cortex is a trademark of Neural DSP Technologies.